I was pretty excited yesterday because a new audio cable arrived for my Mackie ProFx8v2 mixer. How and why would I be excited to receive a patch cable? Why does Fritz need an audio mixer, and should I get one? In this post, I’ll show you how I have my mixer configured, the pros and cons of a mixer, and what this latest cable allows me to configure now.
Continue reading
I’ve been excited to use the Elgato Stream Deck for about a year now, after much encouragement from other streamers to check it out. Now, I can’t speak more highly of the effectiveness and placement of this device in my arsenal of tools as a streamer. Its my MUST have device when I stream, and I bring it everywhere on the road with me to simplify my process. In this post, I’ll give you the quick run-down about what the Stream Deck is, why it’s so important, and some of the tricks that I’ve configured.
Continue reading
I’ve been streaming for 14 months now, and enjoying EVERY minute of it. The top question I get again and again is: how do you do it? what equipment, what software do you use? I had a previous post about the setup I use, but I’ve made so many upgrades and updates, I’ve got to share what I now use. Let’s take a look at how Jeff produces Twitch streams at the start of 2019.
Continue reading
I’ve had a problem at home that I’ve been dealing with for years: I have an old oil tank that came with the house that I just can’t get rid of. It sits in my basement with pipes that go through the foundation and is larger than my basement door. Literally, the tank was installed BEFORE the house was finished being built. We regularly have biodiesel fuel delivered in the late Autumn, Winter, and early Spring months to heat the house. This artifact from the 1970’s irks me to no end, as I need to monitor an analog gauge to know when to re-order oil for my home.
But… I am a software developer! I know the cloud, and I think I know IoT. I wanted to build a device to make this monstrosity’s management simpler. I had the original idea for this in the summer of 2017 and wrote an article about my initial experiments and using the LEAD Tools OCR product to analyze the tank’s gauge and report the ‘real volume’ of the tank. These initial experiments worked, but too much was needed to get the whole thing up and running. I needed a simpler and smaller approach…
Continue reading
I haven’t really put pen to paper or committed bytes around a resolution in the past, but I want to make some changes and set some goals for my stream in the year ahead. I not only want to improve it professionally, but also make some personal changes for the better.
Continue reading